Little Shop MFG 16" Front C6 8-Lug Big Brake Kit | 1988-2000 Chevy/GMC C2500 HD/C3500 OBS

A 16-inch front big brake upgrade with 6-piston C6 calipers for 1988-2000 Chevy/GMC 2WD C2500 HD and C3500 8-lug OBS trucks, in single-rear-wheel and dual-rear-wheel versions. Machined hubs, hats and radial brackets are designed in-house, and the kit is verified to fit Belltech 3700 drop spindles.

Features

• 16" drilled and slotted rotors, included at no extra charge
• 6-piston calipers
• Machined hubs, hats and radial-mount brackets
• Verified to fit Belltech 3700 drop spindles
• Fits most 20" wheels

What's Included

• MFG calipers in the color you choose
• Drilled/slotted 16" rotors
• Machined hubs and hats
• Radial-mount caliper brackets
• Braided stainless hoses only if you choose them above

Fitment

• Fits 1988-2000 2WD C2500 HD and C3500 8-lug trucks only. Not for the 6-lug C2500 LD, and not for K2500/K3500 4WD trucks.
• Works on stock spindles or Belltech 3700 drop spindles (8-lug only). Belltech 3700 spindles must be cut and drilled. Belltech lists the 3700 for 1990-up C2500, so 1988-89 C2500 with the 3700 is unverified.
• Choose single or dual rear wheel above (the choice sets the front hub face). Use the stock rotor identification PDF below before ordering.
• Track width: single-rear-wheel trucks gain about 0.46" per side; with Belltech 3700 spindles the total is about 0.9" per side. The manufacturer lists dual-rear-wheel trucks as about 0.49" narrower per side. Always test fit before driving.

Spindle and Wheel Requirements

• Minimum wheel size: 20" (stock 16" 8-lug wheels do not clear).

Lead Times

• Custom caliper color: allow 4-5 weeks; send the OEM paint code in the order notes. Available on MFG calipers for complete front-and-rear orders only; no tri-coat or Kandy.

Additional Options and Notes

• Suspension type: tell us in the order notes whether you run stock or aftermarket suspension; it does not change the price.
• Machined semi wheel adapters (not selectable above): an optional accessory that adds .625" of track width per side (listed at +$950 by the manufacturer). Contact DC Fab to add them.

Instructions and Downloads

• Stock C20/C30 rotor identification (PDF)
• Installation instructions (PDF)

Fitment and options are as stated by the manufacturer. Please confirm your truck, axle and spindle before ordering.